It simply saves a screenshot in internal memory. I removed most of the code for clarity purpose. Here is a sample code from YOKOGAWA (slightly edited) that can be found online and applies to Visual Basics, but that I could not run in VBA. For now, I added the VISA COM 3.0 Type Library and the VISA COM 488.2 Formatted I/O 1.0 to the Excel references. My first guess would be that I am simply missing the correct library. That is, when calling Call SendIFC(BOARD_ID) or Call EnableRemote(BOARD_ID, intAddrList()), Call SendGPIB(osa, ':mmem:stor:grap color,bmp,''test'',int'), = RecieveBinaryGPIB(osa, byteData()), etc. However, when I try to use NI-488.2 commands in VBA, I get the following error message : In order to communicate with these instruments, you need to use the driver and ADEs for 32 bit.Using VBA, I tried to use the NI-488.2 calls directly, instead of using VISA COM.

Note: The NI tulip and its passport were created to work with the NI-VISA driver and NI-488.2 for 32 bit software. If you still experience issues, please contact National Instruments Technical Support. If after following these steps you still cannot connect to the device, try repairin g the NI-VISA and NI-488.2 drivers. If you are using a Keysight instrument with a NI GPIB-USB-HS, try adding a GPIB connector between the instrument and GPIB-USB-HS. The device includes a license for the NI-488.2 driver software. This device is completely IEEE 488.2 compatible. With no GPIB cable required for instrument connection, you can use the Hi-Speed USB port to control up to 14 programmable GPIB instruments. The GPIB-USB-HS achieves maximum IEEE 488.2 performance. If you are unable to communicate with your device and a VISA test panel in NI MAX fails, check the physical connections. The GPIB-USB-HS is an IEEE 488 controller device for computers with USB slots. This method only applies to Keysight/Agilent/HP's IEEE 488 interface cards.

Under the Tools»Options Agilent 488 Options from the pulldown menu.

Check Enable Agilent GPIB cards for 488 programs.

Select Tools✺gilent 488 from the pulldown menu.

Check Enable Keysight GPIB cards for 488 programs.

Under the Settings tab, select Options»Keysight 488 Options.

Note: During Version 17.x, the software name changed from Agilent Connection Expert to Keysight Connection Expert.

Refer to the following steps to enable NI 488.2 based on the Connection Expert Version you have. of GPIB instruments) NI has a strict terminology on this: Device: NI. Refer to Using Both NI GPIB and Keysight HPIB Controllers in the Same System to enable NIVISATulip.dll. identifying IEEE 488.2 Common commands and queries all these appear at the. The old machine that my company use for measuring is Model. To use the NI-VISA drivers and both Keysight (HP Agilent) and NI GPIB devices, you will need to enable NIVISATulip.dll from MAX and NI 488.2 from within the Keysight (or Agilent) libraries. I need to convert the GPIB to USB using NI-488.2 from national instrument and I need to create a software complete with GUI using python.

Gpib ni 488.2